Minimum Detour Width (works with MSE, SMSE and Parapet Walls)

Adhoc Name: MinimumDetour
Description: Minimum Detour Width (works with MSE, SMSE and Parapet Walls)

Typical Section showing variables

Typical Section showing variables

Typical Section showing variables

ADHOC DESCRIPTIONS

WallSide” - Enter an “L” for the Left side or an “R” for the Right side.

Fill Tolerance” - Value in master units measuring the allowable “minimum” wall excavation slope height. If the height of the wall excavation slope is shorter than this value, the excavation slope will simply draw vertically connecting to the bottom of the proposed pavement subgrade.

CADD Support  |  GEOPAK Typicals  |  Top