CFL Proposed Parapet Wall

Adhoc Name: Prop. Parapet-2
Description: CFL Proposed Parapet Wall

Phase 1 Design (driven by adhocs only)

Typical Section showing variables

Design value chart

Phase 2 Design (driven by adhocs and profiles)

Typical Section showing variables

Design value chart

* Note: See also the Minimum Detour Width options.

ADHOC DESCRIPTIONS

Parapet Thickness” - Parapet wall thickness at top of wall in master units.

Parapet Height” - Parapet wall height from top of pavement to top of wall in master units.

Embedment Depth” - Parapet wall embedment depth in master units.

Structure Exc Width” - Excavation width beyond the parapet wall footing edges in master units.

Wall Excavation Slope Back” - Slope in a Rise:Run format of the excavation line connecting to the bottom of the proposed pavement structure.

Wall Excavation Slope Front” - Slope in a Rise:Run format of the excavation line connecting the bottom front of the proposed wall footing to the existing ground.

Wall Backfill Depth” - Depth in master units of the backfill above the proposed footing on the outside of the wall.

CADD Support  |  GEOPAK Typicals  |  Top