Shoulder Widening (Aggregate shoulder, user defined slope)

Adhoc Name: Prop. Shoulder1
Description: Shoulder Widening (Aggregate shoulder, user defined slope)

Typical Section showing variables

ADHOC DESCRIPTIONS

Begin Super Rate” - Cross slope super elevation rate to use when utilizing the user defined aggregate shoulder widening slope. Specified in a percent format, represents the beginning location of the widening line location. Must never start before the beginning of the proposed baseline. Do not include the percent sign.

End Super Rate” - Cross slope super elevation rate to use when utilizing the user defined pavement widening. Specified in a percent format, represents the ending location of the aggregate shoulder widening line location. If no tapering is desired, set this value to equal the same value as the Begin Super Rate adhoc attribute. Must never end past the end of the proposed baseline. Do not include the percent sign.

EFL Undercut Slope” - Specify S or P to control the slope of the aggregate shoulder undercut lines. S stands for “shoulder” slope and P stands for “pavement” slope.

CADD Support  |  GEOPAK Typicals  |  Top